There are many types of enterprise-level sc interface fiber optic transceivers, and their types also change accordingly according to different classification methods.
sc interface fiber optic transceiver
According to the nature of the fiber, it can be divided into: multimode fiber transceiver and single mode fiber transceiver.
Due to the different optical fibers used, the distances that the transceivers can transmit are also different. The general transmission distance of multi-mode transceivers is between 2 kilometers and 5 kilometers, while the coverage of single-mode transceivers can range from 20 kilometers to 120 kilometers;
According to the required enterprise-level sc interface fiber optic transceivers, it can be divided into: single-fiber fiber optic transceivers and dual-fiber fiber optic transceivers.
Single-fiber optical fiber transceiver: the data received and sent is transmitted on one optical fiber;
Dual-fiber fiber optic transceiver: The data received and sent is transmitted on a pair of fibers.
According to the working level/rate, it can be divided into: 10/100M adaptive fiber optic transceiver and 1000M fiber optic transceiver.
According to the working mode: it can be divided into full-duplex mode and half-duplex mode.
The full-duplex mode means that when the transmission and reception of data are split and transmitted by two different transmission lines, both parties of the communication can perform transmission and reception operations at the same time. This transmission method is full-duplex, full-duplex The mode does not need to switch the direction, so there is no time delay caused by the switching operation;
Half-duplex mode refers to using the same transmission line for both reception and transmission. Although data can be transmitted in both directions, both parties cannot send and receive data at the same time. This transmission method is half-duplex. When the half-duplex mode is adopted, the transmitter and receiver at each end of the communication system are transferred to the communication line through the receiving/transmitting switch to switch the direction, so a time delay will occur.
Application scenarios of sc interface fiber optic transceivers
Through today's introduction, I believe that everyone has a good understanding of the classification of enterprise-level sc interface fiber optic transceivers. If you want to know more about ZR optical fiber series products, welcome customers to come to consult.
