During the covering process, if the cover is too thin, the aluminum tape can create an indentation on the outer jacket of the optical cable core, and, moreover, the outer jacket will not come off because the tooth marks grow on the outer jacket of the loose rubber tube. Depending on the situation, the type suitable for production is particularly relevant.
While using the fiber, the fiber can be weakened. This is also one of the common things. Therefore, it is necessary to perform volume control in the optical cable structure of communication engineering from these two aspects. At the same time, due to the great differences in the geographical background of Japan, the area involved in telecommunication construction projects is usually relatively wide, and the telecommunication construction lines cross the river, sometimes railway information appears, and the span is relatively large.
Fiber optic modules and concentricity defects, among others, are considered to be important components of large failures that cause fiber optic connection failures. Not only that, differences in data openings in multimode fiber have a large impact on connectivity, and this misalignment can significantly increase the failure of fiber connections.
Transmission interface northbound interface technology
simple test
There are often problems and solutions in the construction of long-distance optical cable lines.
The principle of fiber optic ribbon extension monitoring
While solving the above problems, through the form of real-time monitoring, the problem will be solved as soon as possible. The high temperature front end of the cable core enters the water tank and cools after obtaining the outer layer. In order to ensure that the performance of the product group is not affected, it is first necessary to reduce the raw material environment to ensure that the P conversion rate and the performance of the yarn itself meet the industry requirements. By suppressing the yarn from the production point of view, the core wire of the optical cable is received, and the second production, receiving the optical cable core, The craftsmanship of the receiving optical cable core and the kite and jacket of the receiving optical cable is affected by factors such as the influence of loose rubber.
However, there are still many problems in the current construction of optical cables and roads, which seriously hinder the development of communication technology. Investigate the quality of appearance and packaging condition with a focus on investigation. The combination of monitoring systems and pipelines is closely related to the accuracy of the fault location. A necropsy was performed on the effects of the glide while the cable was connected to the glide.
Communication project goal setting is a systematic and tedious process. High consistency in the laying process of the fiber optic cable, avoids the fiber optic cable, which stretches a large stress from pulling, avoids the concentrated stress of the fiber optic cable over time and when turning, and avoids the fiber optic cable from twisting the back. For example, p-modification of low point values is difficult to achieve with pine or fiber optic cable processes, but the protective covering process is manifested on the surface. The story is the formation of high temperature jacket layers and fiber optic cable cores until the emergence of closed body cavities, with cocoon layers. The warmth of the transfer is loose, because the soft point value of this p transformation itself is low, so with the loose, the cocoon layer and door gradually become softer.
