In the Internet era, the construction of weak current room is an extremely important and complex project. Every step in the construction of the weak current room is particularly critical, from design to construction, it needs to be carefully prepared. So, how to wire the weak motor room?
Weak electrical room wiring
1. Ceiling wiring
This way of wiring is the most popular way of wiring in the computer room at present. It is very suitable for the computer room that requires frequent wiring. Various cables can be planned and laid in the ceiling, and corresponding wiring holes (including the floor and the wiring trough) are drilled above each cabinet. ), and pay attention to problems such as water leakage, rodent damage and heat dissipation during construction.
2. Floor wiring
Generally, the equipment room decoration will design an antistatic floor, so that there is enough space under the floor for wiring. Also pay attention to water leakage, rodent damage and heat dissipation under the floor, and also ensure that corresponding threading holes (including the floor and cables) are drilled under each cabinet. groove).
3. Power wiring
When the power supply wiring is carried out in the decoration of the new equipment room, it should be arranged according to the layout of the entire equipment room and the capacity of the UPS. Corresponding power sockets should be arranged near each cabinet and equipment in the plan. The capacity of the socket should be determined according to the power of the connected equipment. fixed, and leave a certain redundancy, generally 10A or 15A. The wire diameter of the power supply should be selected according to the capacity of the power socket and with a certain capacity.
4. Weak current wiring
Weak current wiring mainly includes coaxial thin cable, Category 5 network cable and telephone line, etc. When wiring, it should be noted that there are corresponding cables behind each cabinet and equipment, and future development needs should be considered, and various cables should be classified into categories Tie with nylon braid.
5. Ground wiring
Since the new computer room is full of high-performance computers and network communication equipment, there are strict requirements for grounding. Grounding is also an important measure to eliminate common impedance, prevent capacitive coupling interference, protect the safety of equipment and personnel, and ensure stable and reliable operation of computer systems. . The copper bar for signal grounding should be arranged under the floor of the computer room to meet various grounding needs in the computer room.
The above is the whole content of how to wire the weak current room. The wiring system of the weak current room will directly affect the function of the future computer room, and the general wiring system requires the arming distance to be as short and neat as possible. Hope the above can give you some help.
