1. Floor wiring:
This is one of the most common wiring methods, which makes full use of the space under the floor, but pay attention to water leakage, rodent damage and heat dissipation under the floor, and also ensure that the corresponding wiring holes (including the floor and the wiring trough) are cut under each cabinet.
2. Ceiling wiring:
This wiring method is especially suitable for computer rooms that often require wiring, and is currently very popular. In this method, various wiring power supplies and weak current wiring are included in the ceiling. Of course, pay attention to water leakage, rodent damage and heat dissipation.
The specific wiring contents include: power wiring, weak current wiring and grounding wiring, in which power wiring and weak current wiring are placed in metal wiring grooves. 100×50 or 50×50). The distance between the power wire slot and the weak wire slot should be kept at least 5 cm, and they cannot pass through each other to prevent electromagnetic interference between them.
A. Power wiring:
When the power supply wiring is carried out in the decoration of the new equipment room, it should be arranged according to the layout of the entire equipment room and the capacity of the UPS. Corresponding power sockets should be arranged near each cabinet and equipment in the plan. The capacity of the socket should be determined according to the power of the connected equipment. fixed, and leave a certain redundancy, generally 10A or 15A. The wire diameter of the power supply should be selected according to the capacity of the power socket and with a certain capacity.
B. Weak current wiring:
Weak current wiring mainly includes coaxial thin cable, Category 5 network cable and telephone line, etc. When wiring, it should be noted that there are corresponding cables behind each cabinet and equipment, and future development needs should be considered, and various cables should be classified into categories Tie with nylon braid.
C. Ground wiring:
Since the new computer room is full of high-performance computers and network communication equipment, there are strict requirements for grounding. Grounding is also an important measure to eliminate common impedance, prevent capacitive coupling interference, protect the safety of equipment and personnel, and ensure stable and reliable operation of computer systems. . The copper bar for signal grounding should be arranged under the floor of the computer room to meet various grounding needs in the computer room.
https://www.ductcable.com/product?productId=a7e8d5dd5714426ebc25bac48a30110f
