Tel

008673182038185

3333333
4444
22222


News

Contact Us

  1. Tel:008673182038185
  2. Email:sales@zr-fibercable.com
  3. Address:Building B, Kaixuan International, Furong District, Changsha, Hunan, China
  4. Company:Hunan Zhongruiguang Communication Equipment Co.,Ltd.

News

How does the optical fiber of the ODF distribution frame enter the line?

2022-05-18 16:31:52

ODF fiber optic distribution frame is an optical fiber distribution equipment specially designed for optical fiber communication room. It has optical cable fixing and protection functions, optical cable termination function, and line adjustment function. It is an indispensable part of information equipment room. Let's talk about how the optical fiber of the ODF distribution frame enters the line?


ODF fiber optic distribution frame

1. Strip the fiber optic cable and fix the fiber optic cable to the fiber reel frame

Common optical cables are layered, skeleton and central tube type optical cables. Different optical cables need to be stripped in different ways. After stripping, the optical cables should be fixed to the fiber reel frame.


2. Split the fiber and pass the fiber through the heat shrinkable tube

Separate the fibers of different bundles and colors and pass them through the heat-shrinkable tube. After splicing is complete, the fiber splice can be protected with heat shrink tubing.

OM3 LC LC

3. Turn on the power of the fusion splicer and select the appropriate fusion splicing method.

The power supply of the fusion splicer has two types: AC and DC, which should be switched reasonably according to the type of power supply.


4. Preparation of fiber end face

The quality of the fiber end face will directly affect the quality of the connection, so before the fusion splicing, it is necessary to make a qualified end face.


5. Place the fiber

Put the fiber in the V-shaped groove of the fusion splicer, carefully press the fiber clamp and the fiber clamp, set the position of the fiber in the clamp according to the fiber cutting length, and put it into the draft shield correctly.


6. Connect the fiber

After pressing the splicing key, the fibers move toward each other. During the moving process, a short discharge is generated to clean the surface of the fiber. When the gap between the fiber end faces is appropriate, the fusion splicer stops moving toward each other, and the initial gap is set. The fusion splicer measures and displays the cut. angle.


7, coil fiber and fix

Put the connected optical fiber on the optical fiber storage tray, fix the optical fiber, storage tray, splice box, terminal box, etc., and the optical fiber fusion of the ODF distribution frame is completed.


Leave a message

Copyright © 2005-2022 Hunan Zhongruiguang Communication Equipment Co.,Ltd. All rights reserved

Information submitted... Later, please