The research and development of MPO fiber jumpers and the application in practical engineering have an important role and significance, greatly improving the popularity of optical networks and reducing costs, and are very important applications in optical fiber communication networks, transmission systems and CATV networks. At the same time, the application of MPO fiber jumper high-density wiring in practical engineering has an important role and significance. The use of MPO fiber jumper is a very particular knowledge and skill, and it is also a very important link.
mpo fiber optic patch cord male to female
Possible problems with MPO fiber patch cords
1. Guide pin hole damage
The main reason is that the insertion direction of the male head is inclined during the connection, and the front end of the guide pin of the male head is scratched and scratched. Such damage can directly lead to an increase in part or all of the channel loss value.
2. The end face is dirty
It is mainly caused by premature removal of the dust cap before docking or exposure to a non-clean environment for a long time. Such contamination will directly affect the docking performance of the product, making the docking effect unstable, and even causing damage to the opposite connector during docking.
3. Mechanical damage of parts
It is mainly caused by the excessive application of external force during the construction process. Such damage may not affect the performance in the initial stage, but it will basically fail completely in the short term.
4. Cable mechanical damage
If it is mainly caused by dragging or unintentional cutting during construction, such damage may not affect the performance in the initial stage, but it will basically fail completely in the short term.
In order to avoid the above damage and improve the wiring connection rate and long-term stability, the following points should be paid attention to during the wiring process:
Try to avoid opening the dust cap before connecting the optical fiber jumper.
Try not to remove the dust cap from the adapter interface that has been connected to the adapter panel but has not been docked.
Except for normal mating, do not allow the ground end of the connector to come into contact or scratch with anything else.
If there is foreseeable contamination on the end surface, try to use special cleaning tools or dust-free paper soaked in absolute ethanol to clean the end surface. Do not use paper towels, cotton wool, ordinary cotton swabs and other items to clean the end surface.
When docking the connector, make sure that the connector positioning key is extended backwards in the direction of the adapter or the socket panel is inserted axially, and it is not allowed to repeatedly insert and pull out without being able to view the end face.
When inserting the MPO fiber optic patch cord into the adapter, pay attention to the part of the connector boot, and when pulling it out, hold the part of the connector shell.
When bending the cable, keep the bending radius equal to or greater than 20 times the outer diameter of the cable.
When bundling cables, keep the tightness appropriate, and the cable sheath must not be severely deformed.
When perforating and threading the cable, use the method of pushing and pulling. Do not pull or push the cable vigorously to prevent the cable from being broken or broken due to scratches.
mpo fiber jumper male to female application scenarios
Through today's introduction, I believe that everyone has some understanding of the precautions for the use of MPO fiber jumpers. If you want to know more about ZR MPO fiber patch cords, welcome customers to come and consult.
https://www.ductcable.com/cordSearch?patchTopType=2
