Carrier-grade single-mode optical fiber patch cords are used for patching wiring from machines and equipment to optical fiber routing protocols. There is a thick protective layer thickness, which is generally used in the connection between the optical transceiver and the terminal box, and is used in some industries such as optical fiber communication systems, optical fiber access networks, optical fiber transmission data and local area networks.
Carrier-grade single-mode fiber patch cords
Optical fiber jumpers are also indispensable in the integrated wiring system software. Optical fibers have the advantages of anti-interference, safe operation and maintenance, and remote data transmission. technically. So what are the fiber jumper connection methods? Let's find out together.
1. Cold splicing: Cold splicing uses optical fiber cold splices or optical fiber rapid continuation connectors for connection. The two are all methods of cold splicing when continuing the optical fiber. The optical fiber quick connection searcher is equivalent to the end or terminal equipment, that is, the carrier-grade single-mode optical fiber patch cord and the pigtail head immediately (that is, the optical fiber transmits data with a connector similar to the pigtail head, that is, the quick connector) .
2. Grinding and splicing: Grinding and splicing is a method of on-site grinding and receiving, because the quality of manual grinding is unmatched in the production and processing of factories, which will lead to loss of optical fiber Internet or unstable network speed. In the previous application of network technology, due to the low regulations of the Internet, optical fibers were sufficient to fill this shortcoming, but the current high-speed Internet cannot ignore this element. The failure of the routing protocol, the loss exceeding the provisions of the network design scheme, and the failure of the test make the design staff very upset.
3. Fusion splicing: Optical fiber fusion splicing is more commonly used today. Compared with grinding splicing, fusion splicing has higher connection quality. However, the connector after fusion is one of the factors that cause common faults or losses. Under normal conditions, fusion splicing can obtain The smaller connection loss is generally below 0.2dB, but the radar return loss is not easy to control. In addition, in the whole process of fiber splicing, there are many external factors that affect the quality of splicing. If you choose MTP, which is rarely used in China at this stage, etc. Multi-core ribbon optical fiber connectors and ribbon optical fiber fusion splicers are even more unable to prevent the excessive loss of some optical fibers in the whole process of fusion splicing.
Carrier-grade single-mode fiber patch cord application scenarios
Through the introduction of ZR Fiber, I believe that everyone has some understanding of the connection method of carrier-grade single-mode fiber jumpers in the integrated wiring system. If you want to know more about ZR fiber jumper products, welcome customers to come and consult.
