As we all know, the technical requirements for the placement and wiring of indoor leather cables are different in different scenarios. For example, how should we place leather cables in rural houses? This is a question worth thinking about. Let's talk about how to place the distributed residential leather cable.
Indoor leather cable
When the indoor leather wire optical cable is laid overhead, the tight hoop hook is fixed on the pole with the tight hoop steel belt and the tight hoop clamp. Separate the hanging wire of the outdoor leather cable, and tie the hanging wire to the S fixture, and then hang it on the hoop hook. When the length of the leather cable to be laid exceeds 100 meters, it should be laid from the middle point. .
Use a longitudinal wrap to wrap the extra length of the outer leather cable where the suspension wire of the outdoor leather cable and the S fixing piece are bound. The intersection of outdoor leather cable and other cables should be wrapped and protected with winding tube. When laying the sheathed optical cable, the steel strand of the sheathed optical cable should be properly tightened to withstand the tensile force, the tensile force should not exceed the rated tensile force value N of the sheathed optical cable, and the steel strand should be firmly fixed as required.
Screw buckles should be used to fasten the outdoor sheathed optical cables. At the corner of the wall, the leather cable needs to have a certain arc, so as to ensure the bending radius of the cable, and protect it with a sleeve. It is strictly forbidden to turn the leather cable against the wall at a right angle.
The outdoor leather cable suspension wire is terminated at the three-ditch electronic separation: the outdoor leather cable suspension wire is separated from the leather cable by 30CM, take the middle point, put the self-supporting optical cable suspension wire into the groove and fold it back. After 10 laps, twist 3 flowers and then twist 5 more laps and then twist 3 flowers. The incoming optical cable is fixed with a screw buckle.
Analysis of the cross section of the sheathed fiber optic cable
Through the introduction of ZR Fiber, I believe that everyone has an understanding of how the indoor leather cable is placed in the decentralized house. If you want to know more about ZR fiber jumper products, welcome customers to come and consult.
